Snyder's Heating & Cooling
Furnace, Heat Pump, and Air Conditioning Troubleshooting
PROUDLY SERVING URBANA AND BEYOND
Quick Solutions to Common HVAC Issues
At Snyder’s Heating & Cooling, we know how frustrating it can be when your furnace, heat pump, or air conditioning system isn’t working properly. To help you quickly identify and address issues, we’ve created this troubleshooting guide. Whether you’re dealing with furnace not heating, heat pump not working, or AC blowing warm air, our guide offers step-by-step solutions to the most common problems.
Common Furnace Issues & Troubleshooting Tips
Furnace Not Turning On
If your furnace won’t turn on, check the thermostat to ensure it’s set to “heat” and the temperature is above the current room temperature. Verify that the furnace switch is in the “on” position and that the circuit breaker hasn’t tripped. If these steps don’t work, you may have an issue with the ignition or gas supply that needs professional repair.
Furnace Blowing Cold Air
A furnace that’s blowing cold air can signal several issues. First, check your thermostat settings. If the fan is set to “on” instead of “auto,” it may be blowing air even when the furnace isn’t heating. Additionally, dirty filters or a malfunctioning pilot light can cause cold air to circulate.
Furnace Short Cycling
If your furnace turns on and off frequently, it’s likely short cycling. This could be due to a clogged air filter, thermostat issues, or an improperly sized furnace. Short cycling can cause energy inefficiency and premature system wear, so it’s important to address this issue promptly.
Heat Pump Troubleshooting Tips
Heat Pump Not Heating or Cooling
If your heat pump is not heating or cooling, check the thermostat settings and ensure the unit is set to the correct mode. Inspect the outdoor unit for any debris blocking the airflow, and ensure the system has power. If the problem persists, it could be a refrigerant leak or an issue with the compressor that requires a technician.
Heat Pump Freezing Up
A frozen heat pump is usually caused by restricted airflow or low refrigerant. Ensure the air filters are clean, and the outdoor unit is free of snow, ice, or debris. If the system continues to freeze, it may require a professional inspection to check for leaks or system malfunctions.
Heat Pump Running Constantly
If your heat pump runs continuously, it may be struggling to maintain the desired temperature due to extreme weather conditions, dirty coils, or a malfunctioning thermostat. Regular maintenance and cleaning can prevent this issue, but a professional should inspect if the problem persists.
Air Conditioning Troubleshooting Tips
Air Conditioner Not Cooling
If your AC is blowing warm air, it may be due to a dirty air filter, low refrigerant levels, or blocked airflow. Check the thermostat settings and ensure the air filter is clean. If the issue persists, it could be a refrigerant leak, which needs immediate professional attention.
AC Leaking Water
Air conditioners leaking water typically indicate a clogged condensate drain line or a frozen evaporator coil. Ensure the drain line is clear of debris, and inspect the coils for frost or ice buildup. If water continues to pool around your unit, it’s important to have the system checked by an HVAC expert.
Air Conditioner Not Turning On
If your air conditioner won’t turn on, start by checking the thermostat and circuit breaker. Ensure the system is getting power, and the thermostat is set to the correct temperature. If it still doesn’t turn on, you may be facing a capacitor issue or a problem with the compressor that requires professional repair.
AIR CONDITIONING
SERVICES
HEATING
SERVICES
INDOOR AIR QUALITY
SERVICES
WHY CHOOSE
SNYDER’s?
- Fast & Reliable Service
- Flexible Financing Options
- Quick & EASY SCHEDULING
- licensed & fully insured
- 110% SATISFACTION GUARANTEE
Quality You Can Trust
At Snyder’s Heating & Cooling, we understand that your home comfort system is one of the biggest investments you make in your home. Over a third of the energy used in the United States is dedicated to heating and cooling buildings. That’s why having a properly designed and installed HVAC system can significantly impact your energy costs and overall comfort.
REQUESTING Service
How to Get Started with Snyder's Heating & Cooling
Scheduling Your Service
Contact us anytime to schedule your service. For immediate assistance, call us at 937-653-7304. If you are looking to install new equipment, upgrade existing systems, or improve your indoor air quality, you can schedule a free in-home consultation with our experts. Additionally, we offer an online booking system to set up service appointments at your convenience.
Service Process
During your service appointment, our friendly technician will arrive on time, prepared to assess and address your HVAC needs. We conduct a thorough evaluation to diagnose any issues and provide you with a detailed estimate. Our experts will explain the best solutions for your situation, ensuring you understand all your options before any work begins.
Follow-Up and Support
After completing the service, we follow up to ensure everything is functioning perfectly. We offer ongoing maintenance plans to keep your HVAC system in peak condition and prevent future issues. Our customer service team is always available to answer any questions or address any concerns you may have, ensuring your continued satisfaction.
Our Commitment to Excellence
Snyder’s Heating & Cooling is proud to be a Bryant Factory Authorized Dealer. This designation signifies our commitment to superior skills, service, products, comfort, and a promise of 100% satisfaction, guaranteed. Our technicians are North American Technician Excellence (NATE) certified, ensuring high-quality service every time.
We are also bonded, insured, and maintain an A+ rating with the Better Business Bureau (BBB).
